Микроструктурные превращения и процессы карбидообразования в зоне термического влияния в супермартенситных коррозионностойких сталях
Диссертация
В Главе 4 был подробно изучен металл ЗТВ многослойных сварных швов, выполненных в среднелегированной и высоколегированной марках стали. В среднелегированной стали, не содержащей титан, в ЗТВ были выявлены и идентифицированы карбиды (Сг, Ре)2зСб, расположенные по границам первичных аустенитных зерен. В высоколегированной стали были выявлены и идентифицированы карбиды TiC, содержащие небольшое… Читать ещё >
Список литературы
- L. Smith, М. Celant, «Martensitic Stainless Steels in Context», SMSS 2002, paper No 017.
- STF24 F01211, SINTEF Internal Report, 2001.
- E. Folkhard, «Welding Metallurgy of Stainless Steels», New York, 1988.
- O. Kubaschewski, «Iron-Binary Phase Diagrams», Berlin-Heidelbeg-New York: Springer, Dusseldorf: Verlag Stahleisen m.b. H. 1982.
- K. Bungardt, E. Kunze, E. Horn, «Untersuchungen uber den Aufbau des Systems Eisen-Chrom-Kohlenstoff', Arch. Eisenhuttenwes, vol. 29, pp. 193 203, 1958.
- E. Kunze, «Uber einen besonderen Legierungsbereich im Vierstoffsystem Eisen-KohlenstofF-Chrom-Nickel», Thyssen Edelstahl Techn. Ber. Vol.2, pp. 70−74, 1976.
- M. Hansen, K. Anderko, «Constitution of Binary Alloys», New York-Toronto-London, 1958.
- H.J. Edstrom, L. Ljunberg, «Rost- und saurebestandige Chrom-Nickel-Stahle mit max. 0,030% Kohlestoff als Konstruktionsmaterial fur die chemische Industrie», Werkst. U. Korrosion, vol. 15, pp. 743 753, 1964.
- C.J. Bechtoldt, H.C. Vacher, «Phase Diagram Study of Alloys in the Iron-Chromium-Molybdenum-Nickel System, J.Res. Nat. Bur. Stand., vol. 58, pp. 7−19, 1957.
- G.H. Eichelmann, F.C. Hull, «The Effect of Composition of Spontaneous Transformation of Austenite to Martensite in 18−8 Type Stainless Steel», Trans. A.S.M., vol. 45, pp. 77 104, 1953.
- Sumitomo, Development of Supermartensitic Stainless Steel, 1998.
- M. Kimura, Y. Miyata, T. Toyooka, Y. Kitahaba, «Effect of Retained Austenite on Corrosion Performance for Modified 13% Cr Steel Pipe», Corrosion 2000, paper No 137.
- A.G. Haynes, «Some Factors Governing the Metallurgy and Weldability of 13%Cr and Newer Cr-Ni Martensitic Stainless Steels», Supermartensitic Stainless Steels'99, paper No 3.
- Grong, «Metallurgical Modelling of Welding», The Institute of Materials, 1994, p. 501.
- C.A. Apple, G. Krauss, «The Effect of Heating Rate on the Martensite to Austenite Transformation in Fe-Ni-C Alloys», Acta Metallurgica, vol. 20, pp. 849 856, 1972.
- T.G. Gooch, P. Woollin, A.G. Haynes, «Welding Metallurgy of Low Carbon 13% Chromium Martensitic Steels», Supermartensitic Stainless Steels'99, paper. No 22.
- P.D. Balmers, M. Solari, C.L. Llorente, «Characteristics and Effects of Austenite Resulting from Tempering of 13Cr-NiMo Martensitic Steel Weld Metals», Materials Characterization, vol. 46, pp. 285 296, 2001.
- P.W. Hochanadel, C.V. Robino, G.R. Edwards, M.J. Cieslak, «Heat Treatment of Investment Cast PH 13−8 Mo Stainless Steel: Part I. Mechanical Properties and Microstructure», Metallurgical and Materials Transactions A, vol. 25A, pp. 789 797, April 1994.
- H. Asahi, T. Muraki, Т. Нага, H. Tamehiro, «High Chromium Martensitic Stainless Steel for Line Pipe», NACE Corrosion'95, paper No 79, 1995.
- M. Suga, M. Nagee, M. Katahira, Sh. Endo, T. Arakawa, M. Itoh, «13% Cr Stainless Steel Pipe Manufactured by UOE Process», NKK Technical Review No 81, pp. 37 44, 1991.
- K. Ogawa, H. Hitara, K. Kondo, H. Amaya, M. Ueda, H. Takabe, Y. Miyazaki, Y. Komizo, «Weldability of Super 13Cr Martensitic Stainless Steel Development of Super 13Cr Steel for Line Pipe (2)», Supermartensitic Stainless Steels'99, paper No 25.
- E. Deleu, A. Dhooge, J.-J. Dufrane, «Weldability and Hot Deformability of Different Supermartensitic Stainless Grades by Weld Simulation Testing», Supermartensitic Stainless Steels'99, paper No 27.
- G. Rabensteiner, E. Perteneder, J. Tosch, «Optimierung von weichmartensitischen Chrom-Nickel-Scweibgutegierungen fur den Einsatz im Kernreaktorbau», DVS -Bericht, vol. 75, pp. 261 265, 1982.
- A. Bjarbo, «Austenitizing, Hardening and Tempering of a Modified 12% Chromium Steel», Scandinavian Journal of Metallurgy, vol. 23, pp. 103−112, 1994.
- K.P. Balan, A. Venugopal Reddy, D.S. Sarma, Effect of Single and Double Austenitization Treatments on the Microstructure and Mechanical Properties of 16Cr-2Ni Steel», JMEPEG, Vol. 8(3), pp. 385 393, June 1999.
- P.T. Lovejoy, «Structure and Constitution of Wrought Martensitic Stainless Steels», Handbook of Stainless Steels, ed. by D. Pechner and I.M. Bernstein, pub. by McGraw-Hill Book Company, New York, 1977,6.1−6.23.
- M.D. Perkas, V.M. Kardonskyi, «High Strength Martensitic Steels», Metallurgy, Moscow, 1970.
- M. Tvrdy, V. Vodarek, G. Roznovska, A. KorsaK, j. Seliga, J. Barta, P. Tkacik, «Production Development and Industrial Application of 12Cr-6Ni-2,5Mo Steels», Supermartensitics 2002, paper No 004.
- J.J. Dufrane, E. Franceschetti, J. Heather, H. van der Winden, «Weldable 13Cr Steel. The development of the Components for a Wet Gas Piping System», Stainless Steel World, pp. 27−33, April 1999.
- T. Rogne, M. Svenning, SINTEF Internal Report STF24F012.
- P.D. Bilmes, M. Solari, C.L. Llorente «Characteristics and effects of austenite resulting from tempering of 13Cr NiMo martensitic steel weld metals», Materials Characterization 46 (2001), pp 285 — 296.
- M. Kimura, Y. Miyata, T. Toyooka, Y. Kitahaba «Effect of retained austenite on corrosion performance for modified 13% Cr steel pipe», Corrosion 2000, paper No. 137.
- F.G. Caballero, C. Capdevila, C. Garcia de Andres «Modelling of kinetics of austenite formation in steels with different initial microstructures», ISIJ International, Vol. 41 (2001), No. 10, pp. 1093 1102.
- C. Garcia de Andres, F.G. Caballero, C. Capdevila, L.F. Alvarez «Application of dilatometric analysis to the study of solid-solid phase transformations in steels», Materials Characterization 48 (2002), pp. 101 -111.
- R.L. Miller «A rapid X-ray method for the determination of retained austenite», Transactions of the ASM, vol. 57, 1964, pp. 892 899.
- K.P. Balan, A. Venugopal Reddy, D.S. Sarma «Effect of single and double austenitization treatments on the microstructure and mechanical properties of 16 Cr 2Ni Steel», JMPEG (1999) vol. 8, pp. 385 — 393.
- K.P. Balan, A. Venugopal Reddy, D.S. Sarma, «Austenite Precipitation during tempering in 16Cr 2Ni martensitic stainless steels», Scripta Materialia, vol. 39, No. 7, pp. 909 — 905, 1998.
- A.G. Haynes «Some factors governing the metallurgy and weldability of 13%Cr and newer Cr- Ni martensitic stainless steels», Suprmartensitic Stainless Steels'99, conference proceedings, paper S99 3.
- C.A. Apple, G. Krauss Acta Metall vol. 20, 1972, p. 849
- T.G. Gooch, «Heat Treatment of Welded 13%Cr-4%Ni Martensitic Stainless Steels for Sour Service», Welding Research Supplement, July 1995, pp. 213 223.
- P.W. Hochanadel, C.V. Robino, G.R. Edwards, MJ. Cieslak, «Heat Treatment of Investment Cast PH 13−8 Mo Stainless Steel: Part I. Mechanical Properties and Microstructure», Met. And Mat. Transactions, vol. 25A, April, 1994, pp. 789 798.
- W.M. Garrison, Jr., J.A. Brooks, «The Thermal and Mechanical Stability of Austenite in the Low Carbon Martensitic Steel PH 13−8», Materials Science and Engineering, A149, 1991, pp. 65 72.
- L. Coudreuse, V. Ligier, Ch. Lojewski, P. Toussaint «Environmental induced cracking (SSC and SCC) in supermartensitic stainless steels», Supermartensitic Stainless Steels 2002, paper 02
- P. Felton, M.J. Schofleld «Extending of limits of corrosion behaviour of modified 13% Cr martensitic OCTG at high temperatures», Supermartensitic Stainless Steels'99, paper 32.
- T. Rogne, H.I. Lange, M. Svenning, S. Aldstedt, J.K. Solberg, E. Ladanova, S. Olsen, R. Howard, R. Leturno «Intergranular Corrosion/Cracking of Weldable 13% Cr Steel at Elevated Temperature», Corrosion 2002, paper 2 428.
- T. Rogne, M. Svenning «Intergranular Corrosion of Supermartensitic Stainless Steels a High Temperature Mechanism?», Supermartensitic Stainless Steels 2002, paper 024.
- SINTEF internal report, STF24 F01284.
- Grong «Metallurgical Modelling of Welding», The Institute of Materials, 1994.
- E. Folkard «Welding Metallurgy of Stainless Steels» 1984, New York.
- SINTEF internal report, STF24 F01211.
- P. Villards, L.D. Calvert «Pearson's Handbook of Crystallographic Data for Intermetallic Phases», American Society for Metals, 1985, vol.2, pp 1509, 1510, 1513.
- A. Baumel, Wekst. U Korrosion, vol. 26, 1975, pp 433−443.
- SINTEF internal report, STF24 F03204: non published data.
- J. Enerhaug et. al. «Qualification of welded super 13%Cr Martensitic Stainless Steels for the Asgard field», NACE CORROSION 1999, paper No. 587.
- A. Dhooge, E. Deleu, A. Holy: «Weld Simulation Testing of Different Supermartensitic Stainless Steel Grades», Supermartensitics 2002 paper 030.
- Internal SINTEF Report STF24 F01284, «Mechanisms for Intergranular Corrosion/ SCC of Supermartensitic 13Cr Weldments at Elevated Temperature»
- H.J. Wiester, G. Pier: «Untersuchungen uber die interkristalline Korrosion austenitischer Chrom-Nickel-Stahle nach langdauernder Beanspruchung zwischen 450 und 800 °C» Arch. Eisenhuttenwes, vol. 30, pp 293−297, 1959.
- H.Wiegand, M. Doruk: «Einflub von Kohlenstoff und Molybdan auf die Ausscheidungsvorgange, besonders auf die Bildung intermetalischer Phasen in austenitischen Chrom Nickel — Stahlen.» Arch. Eisenhuttenwes, vol. 33, pp 559−566, 1962.
- H. J. Edstrom, L. Ljundberg: «Rost- und saurebestandige Chrom Nickel -Stable mit max. 0,03% Kohlenstoff als Konstruktionsmaterial fur die chemische Industrie.» Werkst. U. Korrosion, vol. 5, pp 743−753, 1964.
- G. Herbsleb, H. J. Schuller, P. Schwaab: «Ausscheidungs- und Korrosionsverhalten unstabiliserter und stabiliserter 18/10 Chrom — Nickel — Stahle nach kurzzeitigem sensibilisierendem Gluhen.» Werkst. U. Korrosion, vol. 27, pp 560 — 568, 1976.
- P. Villards, L.D. Calvert «Pearson's Handbook of Crystallographic Data for Intermetallic Phases», American Society for Metals, 1985, vol.2, pi583.
- V. Cihal, «Intergranular Corrosion of Steels and Alloys» ELSEVIER, Materials Science Monographs, 18, 1984.
- T. Rogne et al., SINTEF Internal Report STF24 F03204: non published data.
- Ladanova E.V., Solberg J.K., Rorvik G., Kvaale P. E «Post weld heat treatment response of coarse grained heat affected zone in a supermartensitic stainless steel». Supermartensitic Stainless Steels'99, Brussels 1999
- Rogne Т., Lange H.I., Aldstedt S., Svenning M., Solberg J.K., Ladanova E.V. «Elevated temperature corrosion/cracking of large diameter weldable 13% Cr linepipe», Congresso internacional de ductos, Merida, Yucatan, nov. 2001
- Rogne Т., Lange H.I., Aldstedt S., Svenning M., Solberg J.K., Ladanova E.V. «Elevated temperature corrosion/cracking of large diameter weldable 13% Cr linepipe», EUROCORR 2001 oct. 2001
- Rogne Т., Lange H.I., Aldstedt S., Svenning M., Solberg J.K., Ladanova E.V., «Intergranular corrosion/cracking of weldable 13% Cr steel at elevated temperature», Corrosion 2002, paper 2 428.2002
- Ladanova E.V., Solberg J.K., Rogne T. «Transmission electron microscopy investigation of precipitation reactions in coarse-grained heat affected zone in two 13%Cr supermartensitic stainless steels», Supermartensitic Stainless Steels'02, Brussels 2002
- Solberg J.K., Ladanova E., Rogne Т., «Investigation of the Precipitation Mechanism in HAZ of Supermartensitic Stainless Steels. Two-pass Weld Simulation» Proceedings of EUROCORR 2004 2004 pp 1−10.